Back to top

Demolition Hammer

Product Image (GSH 500)

GSH 500

Price: 15265/- INR/Piece

Rated input power 1,100 W Impact energy 7.8 J Tool dimensions (length) 458 mm Impact rate at rated speed 2,900 bpm Weight 5.6 kg Tool dimensions (width) 103 mm Tool dimensions (height) 235 mm Tool holder HEX 17 mm

Product Image (HM1205C)

MAKITA HM1205C DEMOLITION HAMMER

Price: 31190 INR/Piece

Enhanced chipping sensation to soft materials Powerful 1,510 W motor delivers 19.1 J (EPTA-Procedure 05/2009) of impact energy to handle the most demanding applications One touch sliding chuck for easy bit installation and removal Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs Bit can be set at 12 positions for convenience LED lamp indicates when to replace carbon brush LED power light that indicates trouble with the electric circuit Variable speed control dial enables user to match the speed to the application for greater versatility Soft grip provides more comfort and control Soft start suppresses start-up reaction for more control and better accuracy Extended life brushes are longer for more work between service intervals and less downtime 12 Bit angle settings allow the bit to be set at different positions for operating convenience Rubberized ergonomic soft grip provides more comfort Double insulated

Product Image (GSH 500 MAX)

GSH 500 MAX

Price: 19430/- INR/Piece

Rated input power 1,100 W Impact energy 7.8 J Tool dimensions (length) 460 mm Tool holder SDS max Impact rate at rated speed 2,900 bpm Weight 5.7 kg Tool dimensions (width) 103 mm Tool dimensions (height) 235 mm Total vibration values (Hammer drilling in concrete) Vibration emission value ah 12 m/s Uncertainty K 1.5 m/s Hammer drilling in concrete Vibration emission value ah 12 m/s Uncertainty K 1.5 m/s

Product Image (GSH 11 E)

GSH 11 E

Price: 30300/- INR/Piece

Rated input power 1,500 W Impact energy 16.8 J Impact rate at rated speed 900 1,890 bpm Weight 10.1 kg Tool dimensions (length) 570 mm Tool dimensions (height) 270 mm Tool holder SDS max Total vibration values (Chiselling) Vibration emission value ah 18.5 m/s Uncertainty K 2 m/s Chiselling Vibration emission value ah 18.5 m/s Uncertainty K 2 m/s

Product Image (GSH 11 VC)

GSH 11 VC

Price: 55600/- INR/Piece

Rated input power 1,700 W Impact energy 23 J Impact rate at rated speed 900 1,700 bpm Weight 11.4 kg Tool dimensions (width) 110 mm Tool dimensions (length) 680 mm Tool dimensions (height) 236 mm Tool holder SDS max Total vibration values (Chiselling) Vibration emission value ah 8 m/s Uncertainty K 1.5 m/s Chiselling Vibration emission value ah 8 m/s Uncertainty K 1.5 m/s

Product Image (GSH 16-30)

GSH 16-30

Price: 83435/- INR/Piece

Rated input power 1,750 W Impact energy 41 J Impact rate at rated speed 1,300 bpm Weight 16.9 kg Tool dimensions (width) 255 mm Tool dimensions (length) 760 mm Tool holder HEX 30 mm Total vibration values (Chiselling) Vibration emission value ah 13 m/s Uncertainty K 2 m/s Chiselling Vibration emission value ah 13 m/s Uncertainty K 2 m/s

Product Image (GSH 27 VC)

GSH 27 VC

Price: 165610/- INR/Piece

Rated input power 2,000 W Impact energy 62 J Impact rate at rated speed 1,000 bpm Weight 29.5 kg Tool dimensions (width) 600 mm Tool dimensions (length) 760 mm Tool holder HEX 28 mm Total vibration values (Chiselling) Vibration emission value ah 8.5 m/s Uncertainty K 1.5 m/s Chiselling Vibration emission value ah 8.5 m/s Uncertainty K 1.5 m/s

Product Image (HM1511)

MAKITA HM1511 DEMOLITION HAMMER

Price: 87460 INR/Piece

48.9 J AVT SOFT NO LOAD Electric Breaker, 30 mm Hex Shank Both drastically increased power and low vibration are achieved with minimum increase in tool size and weight Powerful 1,850 W motor delivers 48.9 J (EPTA-Procedure 05/2009) of impact energy to handle the most demanding applications Thanks to completely redesigned hammering mechanism and increased motor power as compared with HM1317C series, higher power is achieved with minimum increase in tool size and weight Despite the drastically increased power; Anti-vibration housing, Active dynamic vibration absorber and Soft no-load keep the vibration lower than that of HM1317C series, allowing for efficient chipping for a long period L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced Variable speed control dial enables user to match the speed to the application for greater versatility L.E.D. power light indicates switch failure or cord damage Rubberized ergonomic soft grip provides more comfort Soft start suppresses start-up reaction for more precision and better accuracy Extended life brushes are longer for more work between service intervals and less downtime Automatic brush cut-off protects commutator from damage for longer tool life Easy-to-operate slide switch increases productivity and allows for continuous use Side handle swivels 360 for greater control Double insulated

Product Image (HM1802)

MAKITA DEMOLITION HM1802

Price: 117820 INR/Piece

Highest-in-class demolition power. 71.4 Joules. - Vibration absorbing housing helps to reduce vibration. - Soft start for suppressing start-up reaction. - Soft grip provides more control and less hand fatigue. - Higher durability obtained by strengthening switch. - Double Insulation, HEX Shank and Soft Start. Tool sold without bit.

Product Image (HM1812)

MAKITA DEMOLITION HAMMER HM1812

Price: 133260 INR/Piece

Hits like air without the vibration Efficient 2,000 W motor with improved hammer mechanism delivers 72.8 J (EPTA-Procedure 05/2009) of impact energy to handle the most demanding applications Advanced AVT is a synchronized, three-component system that more effectively reduces vibration in varying conditions resulting in a low 6.5m/s Advanced AVT is a mechanical counterbalance system which greatly reduces vibration and directs more impact energy to the work surface for increased user comfort and greater productivity Advanced AVT provides vibration absorbing housing which moves independently of the motor and hammer mechanism effectively isolating more vibration away from the user LED service & power light indicates switch failure or cord damage Fixed movement handles engineered for more control and greater accuracy LED service light notifies the user approximately 8 hours before brushes need to be replaced Soft start suppresses start-up reaction for more control and better accuracy Recessed lifting handles provide more convenience Automatic brush cut-off protects commutator from damage for longer tool life No hammering when idling function helps increase tool life Includes 5.0 m (16.4 ft.) power cord and integrated cord guide which positions the power cord away from working area Double insulated

X


We are only dealing in the 500km area from Vyttila Ernakulam.
QUALITY ENTERPRISES
No. 29/380F, Matha Building, NH- 47 Bye Pass, Thykoodam, Vytilla, Ernakulam - 682019, Kerala, India
Phone :+918045814348
Fax :91--8589097151
Mr Ajith Kumar Divakaran (Partner)
Mobile :918045814348

  • Send SMS
  • Send Inquiry