Back to top

Cutters

Product Image (MLT100)

TABLE SAW

Price: 36990 INR/Piece

Large cutting capacity (93 mm (3-5/8) at 90 and 64 mm (2-1/2) at 45) Left extension table with smooth sliding action Right and rear extension table enables greater cutting capacity Safety guard is installable and removable without tool On tool storage holds commonly used accessories including: TCT saw blade, Rip fence, Miter gauge etc Electric brake for maximum productivity and increased operator safety See-through blade guard system for greater visibility of blade and line of cut Soft start for smooth start-ups (country-specific) Miter gauge with vise Storage hooks for power supply cord Stand set is available to carry the machine (optional accessories) Externally accessible brushes for easy serviceability Double insulated

Product Image (M2402)

MAKITA CUTT OFF

Price: 4130 INR/Piece

2,200 W continuous rating input (for high voltage areas only); The same high value as the competing models is achieved by changing the armature winding and by redesigning the air-cooling High performance and durability at less expense Powerful 2,200 W motor delivers 3,900 RPM for superior performance and durability Large cutting capacity; Cuts up to 127 mm (5) round and 102 mm (4) x 194 mm (7-5/8) rectangular Adjustable spark guard designed to divert sparks Two-stage lock-off power button for operator convenience (country-specific) Adjustable guide plate provides three angle settings up to 45 L/R Chain secures cutting head in down position for transport and storage Large ergonomic handle (horizontal) allows for smooth saw head operation with reduced fatigue Carrying handle is ergonomically positioned to provide a balanced weight distribution for increased comfort while transporting the saw Lightweight for increased job site portability Quick release vise for increased operator convenience Onboard hex wrench for fast and easy blade changes and keeping it from lost Spindle lock for easy wheel changes Externally accessible brushes for easy serviceability Double insulated

Product Image (M2401B)

MAKITA CUTT OFF

Price: 4130 INR/Piece

High performance and durability at less expense Large cutting capacity; Cuts up to 127 mm (5) round and 102 mm (4) x 194 mm (7-5/8) rectangular Powerful 2,000W motor delivers 3,800 RPM for superior performance and durability Adjustable spark guard designed to divert sparks Two-stage lock-off power button for operator convenience (country-specific) Adjustable guide plate provides three angle settings up to 45 L/R Chain secures cutting head in down position for transport and storage Large ergonomic handle for operator comfort when performing various cutting applications Carrying handle is ergonomically positioned to provide a balanced weight distribution for increased comfort while transporting the saw Lightweight for increased job site portability Quick release vise for increased operator convenience Onboard hex wrench for fast and easy blade changes and keeping it from lost Spindle lock for easy wheel changes Externally accessible brushes for easy serviceability Double insulated

Product Image (M4100B)

MAKITA MARBLE CUTTER

Price: 4130 INR/Piece

High performance and durability at less expense Ergonomically designed handle fits your hand perfectly to provide maximum comfort and control Powerful 1,200 W motor delivers 13,000 RPM Redesigned base with grooved back surface for smoother operation Compact and lightweight for less operator fatigue Easy alignment of base end with the cutting line on workpiece Water supply fixture can be mounted On-tool hex wrench for fast and easy blade changes and keeping it from lost Specialized for right angle cutting only Flat rear end is convenient for replacing the diamond wheel Cuts up to 32 mm (1-1/4) Can be used with wet or dry type wheels (country-specific) Easy to adjust depth gauge for precision cutting Large top handle design for increased comfort Lock-off button helps prevent accidental starts (for tool with lock-off button) Lock-on button for continuous use operation (for tool with lock-on button) Screw and nut construction for high repairability Double insulated Externally accessible brushes for greater serviceability

Product Image (MT410)

MAKITA 410 MARBLE CUTTER

Price: 4130 INR/Piece

Continuous rating input : 1,200W Blade Diameter : 110 mm (4-3/8) Max Cutting Capacity : 90: 32 mm (1-1/4) No Load Speed (RPM) : 13,000 Dimensions (L x W x H) : 226x211x163 mm (8-7/8x 8-5/16x6-3/8) Net weight : 2.9 kg (6.4 lbs.) Power supply cord : 2.0 m (6.6 ft)

Product Image (GA9061)

MAkita Angle Grinder GA9061

Price: 10480 INR/Piece

Continuous rating input : 2,200W Wheel Diameter : 230 mm (9) No Load Speed (RPM) : 6,600 Vibration Level : Surface Grinding w/ Anti-Vibration Side Grip: 5.5 m/s Vibration K Factor : Surface Grinding w/ Anti-Vibration Side Grip: 1.5 m/s Vibration Level : Surface Grinding w/ Normal Side Grip: 6.5 m/s Vibration K Factor : Surface Grinding w/ Normal Side Grip: 1.5 m/s Vibration Level : Disc Sanding w/ Anti-Vibration Side Grip: 2.5 m/s or less Vibration K Factor : Disc Sanding w/ Anti-Vibration Side Grip: 1.5 m/s Vibration Level : Disc Sanding w/ Normal Side Grip: 2.5 m/s or less Vibration K Factor : Disc Sanding w/ Normal Side Grip: 1.5 m/s Sound Pressure Level : 91 dB(A) Sound Power Level : 102 dB(A) Noise K Factor : 3 dB(A) Dimensions (L x W x H) : 450x250x145 mm (17-3/4x9-7/8x5-3/4) Net weight : 5.63 7.99 kg (12.4 17.6 lbs.) Power supply cord : 2.5 m (8.2 ft)

Product Image (HS7010)

MAKITA CIRCULAR SAW

Price: 9090 INR/Piece

High Power and Increased Motor-Burnout Resistance Up to 70% faster cutting than HS7000/HS7600 The weight is similar to HS7000/HS7600 even the power has increased Motor durability is better than HS7000/HS7600 Powerful 1,600 W motor delivers 5,500 RPM for increased performance and job site durability Ergonomic rubberized front grip and handle provide added comfort Large cutting capacity (65 / 67 mm at 90, 44 / 45 mm at 45) Steel plate base Aluminum blade case for high durability and long tool life Aluminum diecast safety cover for high durability and long tool life Bevel cuts 0- 45 for the most common cutting applications Well-balanced and lightweight for superior handling and performance Handy guide rule allows operator to do extra-accurate straight cuts Single action lever for quick adjustment of cutting depth Angular guide at rear for smooth and precise adjustment of bevel angle Flat motor housing design for stability when changing the blade Externally accessible brushes for easy serviceability Double insulated

Product Image (JS1601)

Metal Shear

Price: 22630 INR/Piece

Fast Cutting Action In Steel And Aluminum With Increased Comfort, Maneuverability And Control Minimum outside cutting radius of 250 mm (9-7/8) Small circumference motor housing for increased comfort, maneuverability and control Ribbed motor housing and rear cover for improved gripping during operation Powerful motor with 380W Continuous Input Rating Sliding On / Off thumb switch On-board hex wrench storage Removes continuous metal curl with no distortion 360o rotatable shear head Double insulated

Product Image (HS7600)

MAKITA CIRCULAR SAW

Price: 8850 INR/Piece

Ergonomic rubberized front grip and handle provide added comfort Well-balanced and Lightweight for superior handling and performance Powerful 1,200 W motor delivers 5,200 RPM for performance and job site durability Large cutting capacity (64 mm at 90, 42 mm at 45) Heavy gauge aluminum wraparound base engineered for improved durability and straighter cuts Bevel cuts 0- 45 for the most common cutting applications Large and easy-to-read markings on base for more precise cutting Flat motor housing design for stability when changing the blade Conveniently located shaft and lock for easy blade replacement Two-stage safety trigger switch prevents accidental start up (For tool with Lock-off button) Lock-on button for continuous use operation (For tool with Lock-on button) Rear dust port exhausts sawdust away from operator for clean and comfortable operation Single action lever for quick adjustment of cutting depth Aluminum diecast safety cover for high durability and long tool life Optional dust nozzle can be attached for use with a vacuum cleaner Handy guide rule allows operator to do extra-accurate straight cuts Externally accessible brushes for easy serviceability Ideal for framers, roofers, carpenters and general contractors Double insulated

Product Image (GWS 600)

BOSCH ANGLE GRINDER GWS 600

Price: 2430 INR/Piece

Additional data Rated input power 660 W No-load speed 12,000 rpm Disc diameter 100 mm Grinding spindle thread M10 Switch Lockable Switch Tool dimensions (width) 77 mm Tool dimensions (length) 263 mm Tool dimensions (height) 95 mm Weight 1.5 kg

Product Image (HW102)

MAKITA PRESSURE WASHER

Price: 8120 INR/Piece

Lightweight and compact power washer for home use Ideal for cleaning of motorcycles, garden furniture and balconies Telescopic trolley handle for added maneuverability Plastic type gun is extremely durable Thermoplastic type hose Quick connection for accessories and hose Total Stop System (TSS) switches the motor on and off when the lance trigger is operated, prolonging the motor life Rubber tread wheels for better transport over uneven ground to the job Comes with 5.5m high pressure soft hose, a lance with adjustable nozzle, a foaming nozzle and detergent tank, and a turbo nozzle Inspectable water inlet filter Automatic safety valve with low pressure by-pass 3 axial-piston wobble-plate pump , universal motor Quick connection for accessories Accessory holder Double insulated

Product Image (ETC-125 E1)

EIBENSTOCK MARBLE CUTTER ETC125 E1

Price: 4130 INR/Piece

Economic tile/stone cutter has powerful motor of 1250 watts with soft grip handle and can fit with 110 mm blade. It is ideally suited to cut wood, marble, granite etc.45 Degrees beveling facility.

Product Image (ETC 110)

EIBENSTOCK MARBLE CUTTER ETC 110

Price: 4130 INR/Piece

Economic tile/stone cutter has powerful motor of 1250 watts with soft grip handle and can fit with 110 mm blade. It is ideally suited to cut wood, marble, granite etc.

Product Image (GSA 1300 PCE)

GSA 1300 PCE

Price: 4130 INR/Piece

Rated input power 1,300 W Saw, stroke length 28 mm Weight 4.1 kg Stroke rate at no load 0 2,900 spm Tool dimensions (width) 90 mm Tool dimensions (length) 480 mm Tool dimensions (height) 165 mm Cutting depth Cutting depth in wood 220 mm Cutting depth in steel plate 20 mm Cutting depth in metal profiles and metal pipes 175 mm Total vibration values (Sawing wood) Vibration emission value ah 21 m/s Uncertainty K 1.5 m/s Noise/vibration information Sound pressure level 95 dB(A) Sound power level 106 dB(A) Uncertainty K 3 dB Sawing wood Vibration emission value ah 21 m/s Uncertainty K 1.5 m/s

Product Image (GWS 750-100)

GWS 750-100

Price: 4130 INR/Piece

Additional data Rated input power 750 W No-load speed 11,000 rpm Disc diameter 100 mm Grinding spindle thread M10 Tool dimensions (width) 73 mm Tool dimensions (length) 270 mm Tool dimensions (height) 100 mm Weight 1.8 kg

Product Image (GWS 900-100)

GWS 900-100

Price: 4130 INR/Piece

Rated input power 900 W No-load speed 0 rpm Disc diameter 100 mm Power output 450 W Grinding spindle thread M10 Weight 1.9 kg Switch Lockable Switch Tool dimensions (width) 73 mm Tool dimensions (length) 280 mm Tool dimensions (height) 100 mm

Product Image (GWS 6-125)

GWS 6-125

Price: 4130 INR/Piece

Additional data Rated input power 670 W No-load speed 11,000 rpm Disc diameter 125 mm Rubber backing pad, diameter 125 mm Weight 1.9 kg Power output 400 W Grinding spindle thread M14 Wire cup brush, diameter 70 mm Tool dimensions (length) 263 mm Tool dimensions (height) 104 mm

Product Image (GWS 900-125)

GWS 900-125

Price: 4130 INR/Piece

Rated input power 900 W No-load speed 11,000 rpm Disc diameter 125 mm Power output 450 W Grinding spindle thread M14 Switch Lockable Switch Tool dimensions (width) 73 mm Tool dimensions (length) 280 mm Tool dimensions (height) 100 mm Weight 1.9 kg

Product Image (gws 2200-180)

gws 2200-180

Price: 4130 INR/Piece

Rated input power 2,200 W No-load speed 8,500 8,500 rpm Disc diameter 180 mm Grinding spindle thread M14 Main handle Barrel Weight 5 kg

Product Image (GWS 24-180)

GWS 24-180

Price: 4130 INR/Piece

Rated input power 2,400 W No-load speed 8,500 rpm Disc diameter 180 mm Grinding head, diameter 140 mm Tool dimensions (width) 193 mm Tool dimensions (length) 473 mm Tool dimensions (height) 138 mm Weight 5.7 kg Switch Lockable Switch Grinding spindle thread M14 Main handle Barrel Rubber backing pad, diameter 180 mm

Product Image (GWS 26-180 H)

GWS 26-180 H

Price: 4130 INR/Piece

No-load speed 0 0 rpm Rated input power 2,600 W Disc diameter 180 mm Grinding spindle thread M14 Weight 6 kg Switch PROtection Switch Main handle Barrel

Product Image (GWS 2200-230)

GWS 2200-230

Price: 4130 INR/Piece

Rated input power 2,200 W No-load speed 6,500 rpm Disc diameter 230 mm Grinding spindle thread M14 Weight 5.5 kg Switch Lockable Switch Main handle Barrel

Product Image (GWS 26-230)

GWS 24-230

Price: 4130 INR/Piece

No-load speed 0 rpm Rated input power 2,400 W Disc diameter 230 mm Grinding spindle thread M14 Weight 6 kg Switch Lockable Switch Main handle Bow (rotating)

Product Image (GDC 120)

GDC 120

Price: 4130 INR/Piece

Rated input power 1,200 W Saw blade diameter 110 mm Saw blade bore diameter 110 mm No-load speed 12,000 rpm Weight 2.8 kg

Product Image (9553NB)

Makita Angle Grinder 9553NB

Price: 4130 INR/Piece

Continuous rating input : 710W Wheel Diameter : 100 mm (4) No Load Speed (RPM) : 11,000 Dimensions (L x W x H) : 258x118x97 mm (10-1/8x4-5/8x3-13/16) Net weight : 1.8 kg (3.9 lbs.) Power supply cord : 2.5 m (8.2 ft)

Product Image (M0401B)

MAKITA SAW

Price: 4130 INR/Piece
  • Delivery Time:7 Days
  • Supply Ability:1000 Per Week
  • Material:Tungsten Carbide
  • Diameter:4/5 Inch (in)
  • Weight:2.9 Kilograms (kg)
  • Size:100
  • Width:195 Millimeter (mm)
  • BladeSize:4/5
  • Cutting Speed:13800 RPM
  • Usage:MARBLE CUTTER
Product Image (9553b)

Makita Angle Grinder 9553N

Price: 4130 INR/Piece

Continuous rating input : 710W Wheel Diameter : 100 mm (4) No Load Speed (RPM) : 11,000 Vibration Level : N/A m/s Vibration K Factor : N/A m/s Sound Pressure Level : N/A dB(A) Sound Power Level : N/A dB(A) Noise K Factor : N/A dB(A) Dimensions (L x W x H) : 258x118x97 mm (10-1/8x4-5/8x3-13/16) Net weight : 1.5 1.9 kg (3.3 4.1 lbs.

Product Image (GA4032)

Makita Angle Grinder GA4032

Price: 4130 INR/Piece

Continuous rating input : 710W Wheel Diameter : 100 mm (4) No Load Speed (RPM) : 9,000 Vibration Level : N/A m/s Vibration K Factor : N/A m/s Sound Pressure Level : N/A dB(A) Sound Power Level : N/A dB(A) Noise K Factor : N/A dB(A) Dimensions (L x W x H) : 259x118x104 mm (10-1/4x4-5/8x4-1/8) Net weight : 1.67 1.96 kg (3.68 4.32 lbs.) Power supply cord : 2.5 m (8.2 ft)

Product Image (9556HB)

Maita Angle Grindr 9556HB

Price: 4130 INR/Piece

Continuous rating input : 840W Wheel Diameter : 100 mm (4) No Load Speed (RPM) : 11,000 No Load Speed (RPM) : 11,000 Vibration Level : N/A m/s Vibration K Factor : N/A m/s Sound Pressure Level : N/A dB(A) Sound Power Level : N/A dB(A) Noise K Factor : N/A dB(A) Dimensions (L x W x H) : 271x118x97 mm (10-5/8x4-5/8x3-13/16) Net weight : 1.6 2.0 kg (3.6 4.4 lbs.) Power supply cord : 2.5 m (8.2 ft.)

Product Image (GA4040)

Makita Angle Grinder GA4040

Price: 4130 INR/Piece

Continuous rating input : 1,100W Wheel Diameter : 100 mm (4) No Load Speed (RPM) : 11,000 Vibration Level : Surface Grinding w/ Normal Side Grip: 6.0 m/s Vibration K Factor : Surface Grinding w/ Normal Side Grip: 1.5 m/s Vibration Level : Surface Grinding w/ Anti-Vibration Side Grip: 5.5 m/s Vibration K Factor : Surface Grinding w/ Anti-Vibration Side Grip: 1.5 m/s Vibration Level : Disc Sanding w/ Normal Side Grip: 2.5 m/s or less Vibration K Factor : Disc Sanding w/ Normal Side Grip: 1.5 m/s Vibration Level : Disc Sanding w/ Anti-Vibration Side Grip: 2.5 m/s or less Vibration K Factor : Disc Sanding w/ Anti-Vibration Side Grip: 1.5 m/s Sound Pressure Level : 86 dB(A) Sound Power Level : 97 dB(A) Noise K Factor : 3 dB(A) Dimensions (L x W x H) : 303x117x111 mm (11-7/8x4-5/8x4-3/8) Net weight : 2.2 2.5 kg (4.9 5.6 lbs.) Power supply cord : 2.5 m (8.2 ft)

Product Image (GST 90 BE)

GST 90 BE

Price: 4130 INR/Piece

Rated input power 650 W Stroke rate at no load 500 3,100 spm Weight 2.6 kg Cable length 2.5 m Tool dimensions (width) 80 mm Tool dimensions (length) 332 mm Tool dimensions (height) 212 mm

Product Image (Makita Angle Grinder GA4050R)

Makita Angle Grinder GA4050R

Price: 4130 INR/Piece

Continuous rating input : 1,300W Wheel Diameter : 100 mm (4) Wheel Hole Diameter : 16 mm (5/8) Max Wheel Thickness : 6.4 mm (1/4) No Load Speed (RPM) : 11,000 Noise K Factor : 3 dB(A) Dimensions (L x W x H) : 325 x 117 x 100 mm (12-3/4 x 4-5/8 x 4-5/16) Net weight : 2.3 2.6 kg (5.1 5.7 lbs.) Power supply cord : 2.5 m (8.2 ft)

Product Image (M4101B)

MAKITA SAW

Price: 4130 INR/Piece

High performance and durability at less expense Powerful 1,250 W motor delivers 12,000 RPM Cuts up to 40 mm (1-9/16) Redesigned base with grooved back surface for smoother operation Newly designed blade case protects the depth guide from being deformed during operation Compatible with 110 mm (4-3/8) Diamond cup wheel Compact and lightweight design for less operator fatigue Water supply tube holder allows for easy installation/removal of the tube (country-specific) Easy alignment of base end with the cutting line on workpiece Specialized for right angle cutting only Can be used with wet or dry type wheels (country-specific) Easy to adjust depth gauge for precision cutting Vent of motor housing is drip-resistant Flat rear end is convenient for replacing the diamond wheel Large top handle design for increased comfort Lock-off button helps prevent accidental starts (For tool with Lock-off button) Lock-on button for continuous use operation (For tool with Lock-on button) On-tool hex wrench for fast and easy blade changes and keeping it from lost Double insulated. Externally accessible brushes for greater serviceability

Product Image (GST 650)

GST 650

Price: 4130 INR/Piece

Rated input power 450 W Stroke rate at no load 800 3,100 spm Weight 1.9 kg Saw, stroke length 18 mm Cutting depth Cutting depth in wood 65 mm Cutting depth in aluminium 10 mm Cutting depth in non-alloyed steel 3 mm Total vibration values (Sawing wood) Vibration emission value ah 4.5 m/s Uncertainty K 1.5 m/s Total vibration values (Sawing sheet metal) Vibration emission value ah 5 m/s Uncertainty K 1.5 m/s Noise/vibration information Sound pressure level 85 dB(A) Sound power level 96 dB(A) Uncertainty K 5 dB Sawing wood Vibration emission value ah 4.5 m/s Uncertainty K 1.5 m/s Sawing sheet metal Vibration emission value ah 5 m/s Uncertainty K 1.5 m/s

Product Image (GST 150 BCE)

GST 150 BCE

Price: 4130 INR/Piece

Rated input power 780 W Stroke rate at no load 500 3,100 spm Weight 2.7 kg Cable length 4 m Tool dimensions (width) 79 mm Tool dimensions (length) 316 mm Tool dimensions (height) 214 mm

Product Image (N5900B)

MAKITA CIRCULAR SAW

Price: 4130 INR/Piece

An industry standard for years A hardworking saw with high power 2,000 W to rip through most materials Smooth cutting at high rotational speed of 4,100 RPM Bevel angle is adjustable up to 50 Sturdy steel safety cover with industrial durability High rigidity of rugged steel base provides stability Switch with higher durability Ergonomically designed lever for adjustment of cutting depth Flat-end motor housing for easy blade changes Handy guide rule allows operator to do extra-accurate straight cuts Possible to connect with vacuum cleaner by attaching joint set Externally accessible brushes for easy serviceability Double insulated

Product Image (M5801B)

MAKITA CIRCULAR SAW

Price: 4130 INR/Piece

High performance and durability at less expense Well-balanced and Lightweight for superior handling and performance Ergonomically designed handle with soft grip covered with non-slip elastomer fits your hand perfectly to provide maximum comfort and control Bevel cuts 0- 45 for the most common cutting applications Large cutting capacity (66 mm (2-5/8) at 90, 44 mm (1-3/4) at 45) Powerful 1,050 W motor delivers 4,900 RPM for performance and job site durability Handy rip fence (guide rule) allows operator to do extra-accurate straight cuts Aluminum blade case for high durability and long tool life Single action lever for quick adjustment of cutting depth Flat motor housing design for stability when changing the blade Onboard hex wrench for fast and easy blade changes Two-stage safety trigger switch prevents accidental start up (For tool with Lock-off button) Lock-on button for continuous use operation (For tool with Lock-on button) Double insulated Externally accessible brushes for easy serviceability

Product Image (LS1040)

Compound Miter Saw

Price: 4130 INR/Piece

Pivoting Fence for Supporting Larger Material Powerful 1,650 W direct drive motor for improved performance; 4,600 RPM Dual post compound pivoting arm Miter cuts 0-45 left and 0-52 right Positive miter stops at 9 settings: 15, 22.5, 30, 45, right or left and 0 (90 cuts) Bevel cuts up to 45 to the left Lightweight for easy portability Precision machined aluminum base ensures accurate cuts Performs compound cutting operations Electric brake for maximum productivity Dust bag for a cleaner work environment Holders are provided on both sides of the tool to hold long workpieces horizontally Shaft lock for easy blade changes Double insulated

Product Image (9558HN)

Makita Angle Grinder 9558HN

Price: 4130 INR/Piece

Continuous rating input : 840W Wheel Diameter : 125 mm (5) No Load Speed (RPM) : 11,000 Vibration Level : Surface Grinding: 8.5 m/s Vibration K Factor : Surface Grinding: 1.5 m/s Vibration Level : Disc Sanding: 2.5 m/s or less Vibration K Factor : Disc Sanding: 1.5 m/s Sound Pressure Level : 86 dB(A) Sound Power Level : 97 dB(A) Noise K Factor : 3 dB(A) Dimensions (L x W x H) : 271x140x106 mm (10-5/8x5-1/2x4-3/16) Net weight : 1.7 3.2 kg (3.8 7.1 lbs.)

Product Image (GA5040 R)

Makita Angle Grinder GA5040 R

Price: 4130 INR/Piece

Continuous rating input : 1,100W Wheel Diameter : 125 mm (5) No Load Speed (RPM) : 11,000 Vibration Level : Surface Grinding w/ Normal Side Grip: 7.0 m/s Vibration K Factor : Surface Grinding w/ Normal Side Grip: 1.5 m/s Vibration Level : Surface Grinding w/ Anti-Vibration Side Grip: 6.0 m/s Vibration K Factor : Surface Grinding w/ Anti-Vibration Side Grip: 1.5 m/s Vibration Level : Disc Sanding: 2.5 m/s or less Vibration K Factor : Disc Sanding: 1.5 m/s Sound Pressure Level : 86 dB(A) Sound Power Level : 97 dB(A) Noise K Factor : 3 dB(A) Dimensions (L x W x H) : 303x140x116 mm (11-7/8x5-1/2x4-9/16) Net weight : 2.5 3.6 kg (5.4 8.0 lbs.) Power supply cord : 2.5 m (8.2 ft)

Product Image (3709)

WOOD ROUTER

Price: 4130 INR/Piece

Super smooth rack-and-pinion depth adjustment 530 W motor delivers 30,000 RPM for smooth trimming and light routing applications Transparent base for a clear view of the trimming edge Top-mounted power cord stays out of the way for easier operation Slim design with rubberized grip for comfort Smooth rack-and-pinion mechanism for fine depth adjustment Ergonomic slim body design for added comfort and control Compact with less weight All ball bearing construction for durability and longer tool life Toggle switch for easy operation Externally accessible brushes for easy serviceability Double insulated

Product Image (GA7050)

Makita Angle Grinder GA7050

Price: 4130 INR/Piece

Continuous rating input : 2,000W Wheel Diameter : 180 mm (7) No Load Speed (RPM) : 8,500 Vibration Level : Surface Grinding: 6.5 m/s Vibration K Factor : Surface Grinding: 1.5 m/s Vibration Level : Disc Sanding: 4.0 m/s Vibration K Factor : Disc Sanding: 1.5 m/s Sound Pressure Level : 94 dB(A) Sound Power Level : 105 dB(A) Noise K Factor : 3 dB(A) Dimensions (L x W x H) : 432x200x132 mm (17x7-7/8x5-3/16) Net weight : 3.98 5.00 kg (8.8 11.0 lbs.) Power supply cord : 2.5 m (8.2 ft)

Product Image (M3600B)

WOOD ROUTER

Price: 4130 INR/Piece

High performance and durability at less expense Powerful 1,650 W motor delivers 22,000 RPM for the most demanding applications 0-60 mm (0-2-3/8) plunge depth capacity for easy penetration into workpiece Ergonomically contoured knob style handles with Soft grip Quick release plunge depth adjustment along with 3 preset depth stops for added precision Ergonomic rubberized handles designed for better fit and added comfort Conveniently located plunge lock lever for efficient operation Shaft lock requires one wrench to change bits Chip deflector protects operator from flying chips and debris Can be placed upside down when replacing accessories or not in use Can be connected to dust extraction system with optional dust nozzle Externally accessible brushes for easy serviceability Double insulated

Product Image (GA7020)

Makita Angle Grinder GA7020

Price: 4130 INR/Piece

Continuous rating input : 2,200W Wheel Diameter : 180 mm (7) No Load Speed (RPM) : 8,500 Vibration Level : Surface Grinding w/ Normal Side Grip: 8.5 m/s Vibration K Factor : Surface Grinding w/ Normal Side Grip: 1.5 m/s Vibration Level : Surface Grinding w/ Anti-Vibration Side Grip: 8.0 m/s Vibration K Factor : Surface Grinding w/ Anti-Vibration Side Grip: 1.5 m/s Vibration Level : Disc Sanding: 2.5 m/s Vibration K Factor : Disc Sanding: 1.5 m/s Sound Pressure Level : 89 dB(A) Sound Power Level : 100 dB(A) Noise K Factor : 3 dB(A) Dimensions (L x W x H) : 473x200x140 mm (18-5/8x7-7/8x5-1/2) Net weight : 5.56 6.06 kg (12.26 13.36 lbs.) Power supply cord : 2.5 m (8.2 ft)

Product Image (GA7060)

Makita Angle Grinder GA7060

Price: 4130 INR/Piece

Continuous rating input : 2,200W Wheel Diameter : 180 mm (7) No Load Speed (RPM) : 8,500 Vibration Level : Surface Grinding w/ Anti-Vibration Side Grip: 7.5 m/s Vibration K Factor : Surface Grinding w/ Anti-Vibration Side Grip: 1.5 m/s Vibration Level : Surface Grinding w/ Normal Side Grip: 7.5 m/s Vibration K Factor : Surface Grinding w/ Normal Side Grip: 1.5 m/s Vibration Level : Disc Sanding w/ Anti-Vibration Side Grip: 2.5 m/s Vibration K Factor : Disc Sanding w/ Anti-Vibration Side Grip: 1.5 m/s Vibration Level : Disc Sanding w/ Normal Side Grip: 2.5 m/s Vibration K Factor : Disc Sanding w/ Normal Side Grip: 1.5 m/s Sound Pressure Level : 91 dB(A) Sound Power Level : 102 dB(A) Noise K Factor : 3 dB(A) Dimensions (L x W x H) : 450x200x144 mm (17-3/4x7-7/8x5-5/8) Net weight : 5.38 5.89 kg (11.9 13 lbs.) Power supply cord : 2.5 m (8.2 ft)

Product Image (GA7061)

Makita Angle Grinder GA7061

Price: 4130 INR/Piece

Continuous rating input : 2,200W Wheel Diameter : 180 mm (7) No Load Speed (RPM) : 8,500 Vibration Level : Surface Grinding w/ Anti-Vibration Side Grip: 6.5 m/s Vibration K Factor : Surface Grinding w/ Anti-Vibration Side Grip: 1.5 m/s Vibration Level : Surface Grinding w/ Normal Side Grip: 7.0 m/s Vibration K Factor : Surface Grinding w/ Normal Side Grip: 1.5 m/s Vibration Level : Disc Sanding w/ Anti-Vibration Side Grip: 2.5 m/s Vibration K Factor : Disc Sanding w/ Anti-Vibration Side Grip: 1.5 m/s Vibration Level : Disc Sanding w/ Normal Side Grip: 2.5 m/s Vibration K Factor : Disc Sanding w/ Normal Side Grip: 1.5 m/s Sound Pressure Level : 91 dB(A) Sound Power Level : 102 dB(A) Noise K Factor : 3 dB(A) Dimensions (L x W x H) : 450x200x145 mm (17-3/4x7-7/8x5-3/4) Net weight : 5.53 6.04 kg (12.2 13.3 lbs.) Power supply cord : 2.5 m (8.2 ft)

Product Image (GA7061R)

Angle Grinder GA7061R

Price: 4130 INR/Piece

Continuous rating input : 2,200W Wheel Diameter : 180 mm (7) No Load Speed (RPM) : 8,500 Vibration Level : Surface Grinding w/ Anti-Vibration Side Grip: 6.5 m/s Vibration K Factor : Surface Grinding w/ Anti-Vibration Side Grip: 1.5 m/s Vibration Level : Surface Grinding w/ Normal Side Grip: 7.0 m/s Vibration K Factor : Surface Grinding w/ Normal Side Grip: 1.5 m/s Vibration Level : Disc Sanding w/ Anti-Vibration Side Grip: 2.5 m/s Vibration K Factor : Disc Sanding w/ Anti-Vibration Side Grip: 1.5 m/s Vibration Level : Disc Sanding w/ Normal Side Grip: 2.5 m/s Vibration K Factor : Disc Sanding w/ Normal Side Grip: 1.5 m/s Sound Pressure Level : 91 dB(A) Sound Power Level : 102 dB(A) Noise K Factor : 3 dB(A) Dimensions (L x W x H) : 450x200x145 mm (17-3/4x7-7/8x5-3/4) Net weight : 5.57 6.08 kg (12.3 13.4 lbs.) Power supply cord : 2.5 m (8.2 ft)

Product Image (GA9061R)

Makita Angle Grinder GA9061R

Price: 4130 INR/Piece

Continuous rating input : 2,200W Wheel Diameter : 230 mm (9) No Load Speed (RPM) : 6,600 Vibration Level : Surface Grinding w/ Anti-Vibration Side Grip: 5.5 m/s Vibration K Factor : Surface Grinding w/ Anti-Vibration Side Grip: 1.5 m/s Vibration Level : Surface Grinding w/ Normal Side Grip: 6.5 m/s Vibration K Factor : Surface Grinding w/ Normal Side Grip: 1.5 m/s Vibration Level : Disc Sanding w/ Anti-Vibration Side Grip: 2.5 m/s or less Vibration K Factor : Disc Sanding w/ Anti-Vibration Side Grip: 1.5 m/s Vibration Level : Disc Sanding w/ Normal Side Grip: 2.5 m/s or less Vibration K Factor : Disc Sanding w/ Normal Side Grip: 1.5 m/s Sound Pressure Level : 91 dB(A) Sound Power Level : 102 dB(A) Noise K Factor : 3 dB(A) Dimensions (L x W x H) : 450x250x145 mm (17-3/4x9-7/8x5-3/4) Net weight : 5.68 8.04 kg (12.5 17.7 lbs.) Power supply cord : 2.5 m (8.2 ft)

Product Image (GA9040S)

Makita Angle Grinder GA9040S

Price: 4130 INR/Piece

Continuous rating input : 2,600W Wheel Diameter : 230 mm (9) No Load Speed (RPM) : 6,600 Vibration Level : Surface Grinding: 5.5 m/s Vibration K Factor : Surface Grinding: 1.5 m/s Vibration Level : Disc Sanding: 2.5 m/s or less Vibration K Factor : Disc Sanding: 1.5 m/s Sound Pressure Level : 90 dB(A) Sound Power Level : 101 dB(A) Noise K Factor : 3 dB(A) Dimensions (L x W x H) : 503x250x140 mm (19-3/4x9-7/8x5-1/2) Net weight : 6.65 8.94 kg (14.7 19.7 lbs.) Power supply cord : 2.5 m (8.2 ft)

Product Image (GB801)

Makita Bench grinder GB801

Price: 4130 INR/Piece

Continuous rating input : 550W Wheel Diameter : 205 mm (8) Wheel width : 19 mm (3/4) Hole Diameter : 15.88 mm (5/8) H.P. : 3/4 No Load Speed (RPM) : 2,850 (50 Hz) / 3,450 (60 Hz) Sound Pressure Level : 77 dB(A) Noise K Factor : 3 dB(A) Dimensions (L x W x H) : 395x265x333 mm (15-9/16x10-7/16x13-7/64) Net weight : 19.91 19.63 kg (43.89 43.28 lbs.)

Product Image (PC5000C)

Makita Concrete Planer PC5000C

Price: 4130 INR/Piece

Continuous rating input : 1,400W Wheel Diameter : 125 mm (5) Hole Diameter : 22.23 mm (7/8) No Load Speed (RPM) : 10,000 Dimensions (L x W x H) : 437x235x195 mm (17-1/8x9-1/4x7-5/8) Net weight : 4 kg (8.9 lbs.) Power supply cord : 5.0 m (16.4 ft)

Product Image (PW5001C)

Makita Stone Polisher PW5001c

Price: 4130 INR/Piece

Continuous rating input : 900W Capacity : Pad : 100-125 mm (4-5) No Load Speed (RPM) : 2,000-4,000 Overall Length : 359 mm (14-1/8) Net weight : 2.3 2.6 kg (5.1 5.7 lbs.) Power supply cord : 4.0 m (13.1 ft)

Product Image (PC5010C)

Makita Angle Polisher PC5001C

Price: 4130 INR/Piece

Continuous rating input : 1,400W Wheel Diameter : 125 mm (5) Hole Diameter : 22.23 mm (7/8) No Load Speed (RPM) : 4,000 9,000 Vibration Level : Surface Grinding w/ Loop Handle: 5.5 m/s Vibration K Factor : Surface Grinding w/ Loop Handle: 1.5 m/s Vibration Level : Disc Sanding w/ Normal Side Grip: 2.5 m/s or less Vibration K Factor : Disc Sanding w/ Normal Side Grip: 1.5 m/s Sound Pressure Level : 85.0 dB(A) Sound Power Level : 96.0 dB(A) Dimensions (L x W x H) : 437x235x195 mm (17-1/8x9-1/4x7-5/8) Noise K Factor : 3 dB(A) Dimensions (L x W x H) : 350x231x179 mm (13-3/4x9-1/8x7) Net weight : 2.5 3.6 kg (5.5 7.9 lbs.) Power supply cord : 4.0 m (13.1 ft)

Product Image (9237C)

Makita Angle Polisher 9237C

Price: 4130 INR/Piece

Continuous rating input : 1,200W Capacity : Wool Pad: 180 mm (7) Wool Bonnet: 180 mm (7) No Load Speed (RPM) : 0 3,200 Vibration Level : 2.5 m/s or less Vibration K Factor : 1.5 m/s Sound Pressure Level : 83 dB(A) Sound Power Level : 94 dB(A) Noise K Factor : 3 dB(A) Dimensions (L x W x H) : 431x198x187 mm (17x7-3/4x7-3/8) Net weight : 3.2 3.4 kg (7 7.5 lbs.) Power supply cord : 2.5 m (8.2 ft)

Product Image (SA7000C)

Makita Angle sander SA7000C

Price: 4130 INR/Piece

Continuous rating input : 1,600W Abrasive Disc Size : 180 mm (7) Capacity : Pad : 180 mm (7) No Load Speed (RPM) : 0-4,000 Dimensions (L x W x H) : 453x170x136 mm (17-7/8x6-11/16x5-3/8) Net weight : 3.5 3.6 kg (7.7 7.9 lbs.) Power supply cord : 2.5 m (8.2 ft)

Product Image (PO5000C)

Makita Random Orbital Polisher PO5000C

Price: 4130 INR/Piece

Continuous rating input : 900W Pad Size : 125 mm (5) Orbits Per Minute (OPM) : 0 6,800 Strokes Per Minute (SPM) : 0 13,600 No Load Speed (RPM) : 0 780 Orbit Diameter : 5.5 mm (7/32) Vibration Level : Polishing: 6.5 m/s Vibration K Factor : Polishing: 1.5 m/s Sound Pressure Level : 81 dB(A) Sound Power Level : 92 dB(A) Noise K Factor : 3 dB(A) Dimensions (L x W x H) : 451x123x134 mm (17-3/4x4-7/8x5-1/4) Net weight : 2.8 3.0 kg (6.2 6.5 lbs.) Power supply cord :4.0 m (13.1 ft)

Product Image (GOP 30-28)

BOSCH MULTI-CUTTER GOP 30-28

Price: 4130 INR/Piece

Rated input power 300 W No-load oscillation 8,000 20,000 opm Oscillation angle on left and right 1.4 Weight 1.5 kg Total vibration values (Grinding) Vibration emission value ah 2 m/s Uncertainty K 1.5 m/s Total vibration values (Sawing with plunge-cutting saw blade) Vibration emission value ah 10 m/s Uncertainty K 1.5 m/s Total vibration values (Sawing with segment saw blade) Vibration emission value ah 6.5 m/s Uncertainty K 1.5 m/s Noise/vibration information Sound pressure level 81 dB(A) Sound power level 92 dB(A) Uncertainty K 3 dB Grinding Vibration emission value ah 2 m/s Uncertainty K 1.5 m/s Sawing with plunge-cutting saw blade Vibration emission value ah 10 m/s Uncertainty K 1.5 m/s Sawing with segment saw blade Vibration emission value ah 6.5 m/s Uncertainty K 1.5 m/s Scraping Vibration emission value ah 4.5 m/s Uncertainty K 1.5 m/s

Product Image (M9506B)

MAKITA Angle Grinder M9506B

Price: 4130 INR/Piece

Continuous rating input : 720W Wheel Diameter : 100 mm (4) No Load Speed (RPM) : 11,000 Vibration Level : Surface Grinding: 6.5 m/s Sound Pressure Level : 86 dB(A) Sound Power Level : 97 dB(A) Dimensions (L x W x H) : 261x118x101 mm (10-1/4x4-5/8x4) Net weight : 1.6 kg (3.6 lbs.) Power supply cord : 2.0 m (6.6 ft.)

Product Image (EST 355 I)

EIBENSTOCK CUTT OFF

Price: 4130 INR/Piece

This chopsaw with extremely powerful 2300 Watt motor can accommodate wheels upto 355 mm diameter and Weight only 17 Kg.

X


We are only dealing in the 500km area from Vyttila Ernakulam.
QUALITY ENTERPRISES
No. 29/380F, Matha Building, NH- 47 Bye Pass, Thykoodam, Vytilla, Ernakulam - 682019, Kerala, India
Phone :+918045814348
Fax :91--8589097151
Mr Ajith Kumar Divakaran (Partner)
Mobile :918045814348

  • Send SMS
  • Send Inquiry